caver.kct.kip17

caver.kct.kip17 helps you easily handle a smart contract that implements KIP-17 as a JavaScript object on the Klaytn blockchain.

The caver.kct.kip17 inherits caver.contract to implement the KIP-17 token contract. The caver.kct.kip17 holds the same properties of caver.contract whereas there are additional methods to implement extra features. This section only introduces the newly added bound methods of the caver.kct.kip17.

The code that implements KIP-17 for caver-js is available on the Klaytn Contracts Github Repo.

For more information about KIP-17, see Klaytn Improvement Proposals.

caver.kct.kip17.deploy

caver.kct.kip17.deploy(tokenInfo, deployer)

Deploys the KIP-17 token contract to the Klaytn blockchain. A contract deployed using caver.kct.kip17.deploy is a non-fungible token that follows the KIP-17 standard.

After successful deployment, the promise will be resolved with a new KIP17 instance.

Parameters

Name

Type

Description

tokenInfo

object

The information needed to deploy KIP-17 token contract on the Klaytn blockchain. See the below table for the details.

deployer

string | object

The address in the keyring instance to deploy the KIP-17 token contract. This address must have enough KLAY to deploy. See Keyring for more details. If you want to define your fields to use when sending transactions, you can pass the object type as a parameter. If you want to use Fee Delegation when deploying KIP-17 contracts, you can define the fields related to fee delegation in the object. For the use of these fields, refer to the parameter description of approve.

The tokenInfo object must contain the following:

Name

Type

Description

name

string

The name of the token.

symbol

string

The symbol of the token.

Return Value

PromiEvent: A promise combined event emitter, which is resolved with a new KIP17 instance. Additionally, the following events can occur:

Name

Type

Description

transactionHash

string

Fired right after the transaction is sent and a transaction hash is available.

receipt

object

Fired when the transaction receipt is available. If you want to know about the properties inside the receipt object, see getTransactionReceipt. Receipts from KIP17 instances have an 'events' attribute parsed via abi instead of a 'logs' attribute.

error

Error

Fired if an error occurs during sending.

Example

// using the promise
> caver.kct.kip17.deploy({
    name: 'Jasmine',
    symbol: 'JAS',
}, '0x{address in hex}').then(console.log)
KIP17 {
    ...
    _address: '0xfA7D967f414468083aDAd85257a2cBD6019693C2',
    _jsonInterface: [
        ...
        {
            anonymous: false,
            inputs: [
                { indexed: true, name: 'owner', type: 'address' },
                 { indexed: true, name: 'operator', type: 'address' },
                 { indexed: false, name: 'approved', type: 'bool' }
            ],
            name: 'ApprovalForAll',
            type: 'event',
            signature: '0x17307...'
        }
    ] 
}

// Send object as second parameter
> caver.kct.kip17.deploy({
        name: 'Jasmine',
        symbol: 'JAS',
    },
    {
        from: '0x{address in hex}',
        feeDelegation: true,
        feePayer: '0x{address in hex}',
    }).then(console.log)

// using event emitter and promise
> caver.kct.kip17.deploy({
    name: 'Jasmine',
    symbol: 'JAS',
}, '0x{address in hex}')
.on('error', function(error) { ... })
.on('transactionHash', function(transactionHash) { ... })
.on('receipt', function(receipt) {
    console.log(receipt.contractAddress) // contains the new token contract address
})
.then(function(newKIP17Instance) {
    console.log(newKIP17Instance.options.address) // instance with the new token contract address
})

caver.kct.kip17.detectInterface

caver.kct.kip17.detectInterface(contractAddress)

Returns the information of the interface implemented by the token contract. This static function will use kip17.detectInterface.

Parameters

Name

Type

Description

contractAddress

string

The address of the KIP-7 token contract

Return Value

Promise returns an object containing the result with boolean values whether each KIP-17 interface is implemented.

Example

> caver.kct.kip17.detectInterface('0x{address in hex}').then(console.log)
{
    IKIP17: true,
    IKIP17Metadata: true,
    IKIP17Enumerable: true,
    IKIP17Mintable: true,
    IKIP17MetadataMintable: true,
    IKIP17Burnable: true,
    IKIP17Pausable: true,
}

caver.kct.kip17.create

caver.kct.kip17.create([tokenAddress])

Creates a new KIP17 instance with its bound methods and events. This function works the same as new KIP17.

NOTE caver.kct.kip17.create is supported since caver-js v1.6.1.

Parameters

See the new KIP17.

Return Value

See the new KIP17.

Example

// Create a KIP17 instance without a parameter
> const kip17 = caver.kct.kip17.create()

// Create a KIP17 instance with a token address
> const kip17 = caver.kct.kip17.create('0x{address in hex}')

new KIP17

new caver.kct.kip17([tokenAddress])

Creates a new KIP17 instance with its bound methods and events.

Parameters

Name

Type

Description

tokenAddress

string

(optional) The address of the KIP-17 token contract, which can be assigned later through kip17.options.address = '0x1234..'

Return Value

Type

Description

object

The KIP17 instance with its bound methods and events.

Example

// Create a KIP17 instance without a parameter
> const kip17 = new caver.kct.kip17()

// Create a KIP17 instance with a token address
> const kip17 = new caver.kct.kip17('0x{address in hex}')

kip17.clone

kip17.clone([tokenAddress])

Clones the current KIP17 instance.

Parameters

Name

Type

Description

tokenAddress

string

(optional) The address of the smart contract that deployed another KIP-17 token. If omitted, it will be set to the contract address in the original instance.

Return Value

Type

Description

object

The clone of the original KIP17 instance.

Example

> const kip17 = new caver.kct.kip17(address)

// Clone without a parameter
> const cloned = kip17.clone()

// Clone with the address of the new token contract
> const cloned = kip17.clone('0x{address in hex}')

kip17.detectInterface

kip17.detectInterface()

Returns the information of the interface implemented by the token contract.

Parameters

None

Return Value

Promise returns an object containing the result with boolean values whether each KIP-17 interface is implemented.

Example

> kip17.detectInterface().then(console.log)
{
    IKIP17: true,
    IKIP17Metadata: true,
    IKIP17Enumerable: true,
    IKIP17Mintable: true,
    IKIP17MetadataMintable: true,
    IKIP17Burnable: true,
    IKIP17Pausable: true,
}

kip17.supportsInterface

kip17.supportsInterface(interfaceId)

Returns true if this contract implements the interface defined by interfaceId.

Parameters

Name

Type

Description

interfaceId

string

The interfaceId to be checked.

Return Value

Promise returns boolean: true if this contract implements the interface defined by interfaceId.

Example

> kip17.supportsInterface('0x80ac58cd').then(console.log)
true

> kip17.supportsInterface('0xa22cb465').then(console.log)
false

kip17.name

kip17.name()

Returns the name of the token.

Parameters

None

Return Value

Promise returns string: The name of the token.

Example

> kip17.name().then(console.log)
Jasmine

kip17.symbol

kip17.symbol()

Returns the symbol of the token.

Parameters

None

Return Value

Promise returns string: The symbol of the token.

Example

> kip17.symbol().then(console.log)
JAS

kip17.totalSupply

kip17.totalSupply()

Returns the total number of tokens minted by the contract.

Parameters

None

Return Value

Promise returns BigNumber: The total number of tokens.

Example

> kip17.totalSupply().then(console.log)
10

kip17.tokenURI

kip17.tokenURI(tokenId)

Returns the URI for a given token id.

Parameters

Name

Type

Description

tokenId

BigNumber | string | number

The id of the token.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns string: The URI of the given token.

Example

> kip17.tokenURI(0).then(console.log)
https://kip17.example/uri-ex-caver.json

kip17.tokenOfOwnerByIndex

kip17.tokenOfOwnerByIndex(owner, index)

Searches the owner's token list for the given index, and returns the token id of a token positioned at the matched index in the list if there is a match.

Parameters

Name

Type

Description

owner

string

The address of the account who owns tokens.

index

BigNumber | string | number

The index of a token in owner's token list.

NOTE The index parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns BigNumber: The id of the token.

Example

> kip17.tokenOfOwnerByIndex('0x{address in hex}', 5).then(console.log)
5

kip17.tokenByIndex

kip17.tokenByIndex(index)

Searches the list of all tokens in this contract for the given index, and returns the token id of a token positioned at the matched index in the list if there is a match. It reverts if the index is greater or equal to the total number of tokens.

Parameters

Name

Type

Description

index

BigNumber | string | number

The index of a token to be queried.

NOTE The index parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns BigNumber: The id of the token.

Example

> kip17.tokenByIndex(1).then(console.log)
1

kip17.balanceOf

kip17.balanceOf(address)

Returns the balance of the given account address. The balance of an account in KIP-17 is the total number of NFTs (Non-Fungible Tokens) owned by the account.

Parameters

Name

Type

Description

address

string

The address of the account to be checked for its balance.

Return Value

Promise returns BigNumber: The account balance.

Example

> kip17.balanceOf('0x{address in hex}').then(console.log)
9

kip17.ownerOf

kip17.ownerOf(tokenId)

Returns the address of the owner of the specified token id.

Parameters

Name

Type

Description

tokenId

BigNumber | string | number

The id of the token.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns string: The address of the account that owns the given token.

Example

> kip17.ownerOf(8).then(console.log)
0x0e0E95426343d97CC7BB913C7D7DBea065A31814

kip17.getApproved

kip17.getApproved(tokenId)

Returns the address who was permitted to transfer this token, or 'zero' address, if no address was approved. It reverts if the given token id does not exist.

Parameters

Name

Type

Description

tokenId

BigNumber | string | number

The id of the token.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns string: The address of the account that has the right to transfer the given token.

Example

// If an approved address exists
> kip17.getApproved(10).then(console.log)
0x23D8E9cae17b22d3DAC65b4F7D2C737C6A7b865d

// If no approved address exists
> kip17.getApproved(3).then(console.log)
0x0000000000000000000000000000000000000000

kip17.isApprovedForAll

kip17.isApprovedForAll(owner, operator)

Returns true if an operator is approved to transfer all tokens that belong to the owner.

Parameters

Name

Type

Description

owner

string

The address of an account that owns tokens and has allowed the operator to send all its tokens.

operator

string

The address of the account approved to send owner's all tokens in place of the owner.

Return Value

Promise returns boolean: true if an operator is approved to send all tokens that belong to the owner.

Example

> kip17.isApprovedForAll('0x{address in hex}', '0x{address in hex}').then(console.log)
false

> kip17.isApprovedForAll('0x{address in hex}', '0x{address in hex}').then(console.log)
true

kip17.isMinter

kip17.isMinter(address)

Returns true if the given account is a minter who can issue new tokens in the current contract conforming to KIP-17.

Parameters

Name

Type

Description

address

string

The address of the account to be checked for having the minting right.

Return Value

Promise returns boolean: true if the account is a minter.

Example

> kip17.isMinter('0x{address in hex}').then(console.log)
true

> kip17.isMinter('0x{address in hex}').then(console.log)
false

kip17.paused

kip17.paused()

Returns true if the contract is paused, and false otherwise.

Parameters

None

Return Value

Promise returns boolean: true if the contract is paused.

Example

> kip17.paused().then(console.log)
true

> kip17.paused().then(console.log)
false

kip17.isPauser

kip17.isPauser(address)

Returns true if the given account is a pauser who can suspend transferring tokens.

Parameters

Name

Type

Description

address

string

The address of the account to be checked for having the right to suspend transferring tokens.

Return Value

Promise returns boolean: true if the account is a pauser.

Example

> kip17.isPauser('0x{address in hex}').then(console.log)
true

> kip17.isPauser('0x{address in hex}').then(console.log)
false

kip17.approve

kip17.approve(to, tokenId [, sendParam])

Approves another address to transfer a token of the given token id. The zero address indicates there is no approved address. There can only be one approved address per token. This method is allowed to call only by the token owner or an approved operator.

Note that this method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

to

string

The address of the account who spends tokens in place of the owner.

tokenId

BigNumber | string | number

The id of the token the spender is allowed to use.

sendParam

object

(optional) An object with defined parameters for sending a transaction.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

The sendParam object can contain the following:

Name

Type

Description

from

string

(optional) The address from which the transaction should be sent. If omitted, it will be set by kip17.options.from. If neither of from in sendParam object nor kip17.options.from were not provided, an error would occur.

gas

number | string

(optional) The maximum gas provided for this transaction (gas limit). If omitted, it will be set by caver-js via calling kip17.methods.approve(spender, tokenId).estimateGas({from}).

gasPrice

number | string

(optional) The gas price in peb to use for this transaction. If omitted, it will be set by caver-js via calling caver.klay.getGasPrice.

value

number | string | BN | BigNumber

(optional) The value to be transferred in peb.

feeDelegation

boolean

(optional, default false) Whether to use fee delegation transaction. If omitted, kip17.options.feeDelegation will be used. If both omitted, fee delegation is not used.

feePayer

string

(optional) The address of the fee payer paying the transaction fee. When feeDelegation is true, the value is set to the feePayer field in the transaction. If omitted, kip17.options.feePayer will be used. If both omitted, throws an error.

feeRatio

string

(optional) The ratio of the transaction fee the fee payer will be burdened with. If feeDelegation is true and feeRatio is set to a valid value, a partial fee delegation transaction is used. The valid range of this is between 1 and 99. The ratio of 0, or 100 and above are not allowed. If omitted, kip17.options.feeRatio will be used.

NOTE feeDelegation, feePayer and feeRatio are supported since caver-js v1.6.1.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.approve('0x{address in hex}', 10, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x3875c3f3120c1773c3adeb97260808c8a385bf8427bc203d10cbc5d262f67dbc',
    blockNumber: 2650,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x5e0e6f1f0bdf9a263e1b1bb6e9759ba182982377',
    ...
    events: {
        Approval: {
            address: '0x5E0e6F1F0bDf9A263e1B1bB6e9759Ba182982377',
            blockNumber: 2650,
            transactionHash: '0x0ae92570560d64fa103c8be1861c8625d34ac560066398d9ad0d389ad5f7e441',
            transactionIndex: 0,
            blockHash: '0x3875c3f3120c1773c3adeb97260808c8a385bf8427bc203d10cbc5d262f67dbc',
            logIndex: 0,
            id: 'log_55296c9d',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                '1': '0x58746F9D739bC81713E5F5512529876F508a6166',
                '2': '2',
                owner: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                approved: '0x58746F9D739bC81713E5F5512529876F508a6166',
                tokenId: '2',
            },
            event: 'Approval',
            signature: '0x8c5be1e5ebec7d5bd14f71427d1e84f3dd0314c0f7b2291e5b200ac8c7c3b925',
            raw: {
                data: '0x',
                topics: [ '0x8c5be...', '0x00...afd', '0x00...166', '0x00...002' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.approve('0x{address in hex}', 10, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.approve('0x{address in hex}', 10).then(console.log)

kip17.setApprovalForAll

kip17.setApprovalForAll(to, approved [, sendParam])

Approves the given operator to, or disallow the given operator, to transfer all tokens of the owner.

Note that the setApprovalForAll method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

to

string

The address of an account to be approved/prohibited to transfer the owner's all tokens.

approved

Boolean

This operator will be approved if true. The operator will be disallowed if false.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.setApprovalForAll('0x{address in hex}', false, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x34379ac5b71f16f41d5171d021ca2945e02c60d9fb7f85fc0127262c2ce72b47',
    blockNumber: 3340,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x1f15b1a4da5437b29bfb7f248b5e344e6b16b654',
    ...
    events: {
        ApprovalForAll: {
            address: '0x1f15B1A4DA5437b29BfB7f248B5e344E6b16b654',
            blockNumber: 3340,
            transactionHash: '0x72fdf23482b9cf164638e6cbdfdf56541a6189c88639e21f076a8a50ef749a50',
            transactionIndex: 0,
            blockHash: '0x34379ac5b71f16f41d5171d021ca2945e02c60d9fb7f85fc0127262c2ce72b47',
            logIndex: 0,
            id: 'log_1069ad22',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                '1': '0x399bE7034F26feFB5AE683e488903B8bE5ad38b8',
                '2': false,
                owner: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                operator: '0x399bE7034F26feFB5AE683e488903B8bE5ad38b8',
                approved: false,
            },
            event: 'ApprovalForAll',
            signature: '0x17307eab39ab6107e8899845ad3d59bd9653f200f220920489ca2b5937696c31',
            raw: {
                data: '0x0000000000000000000000000000000000000000000000000000000000000000',
                topics: [ '0x17307...', '0x00...afd', '0x00...8b8' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.setApprovalForAll('0x{address in hex}', false, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.setApprovalForAll('0x{address in hex}', true).then(console.log)

kip17.transferFrom

kip17.transferFrom(from, to, tokenId [, sendParam])

Transfers the token of the given token id, tokenId from the token owner's balance to another address. The address that was authorized to send the token owner's token (the operator) or the token owner him/herself is expected to execute this token transfer transaction. Thus, an authorized account or the token owner should be the sender of this transaction whose address must be given at sendParam.from or kip17Instance.options.from. Unless both sendParam.from and kip17Instance.options.from are provided, an error would occur. It is recommended to use safeTransferFrom whenever possible instead of this method.

Note that sending this transaction will charge the transaction fee to the transaction sender.

Parameters

Name

Type

Description

from

string

The address of the owner or the approved operator of the given token.

to

string

The address of the account to receive the token.

tokenId

BigNumber | string | number

The id of the token you want to transfer.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x9cae3aa93d327804f333674a77d5d01d8c7908c49749b0d747b6391faa232b58',
    blockNumber: 3592,
    contractAddress: null,
    from: '0x9c4fc0ab840914a29c7deb5cc5c625a4cec3a9cd',
    ...
    status: true,
    to: '0x6e611498570bbc8cb127899c4d24e156ec72473a',
    ...
    events: {
        Transfer: {
            address: '0x6e611498570bBc8cb127899C4D24e156ec72473a',
            blockNumber: 3592,
            transactionHash: '0x386af961e5acda2c5bd58ec71ee52f579dc2b07a2e5ec97678453f04cc1b709a',
            transactionIndex: 0,
            blockHash: '0x9cae3aa93d327804f333674a77d5d01d8c7908c49749b0d747b6391faa232b58',
            logIndex: 0,
            id: 'log_c2ba5874',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                '1': '0x045796ABC035001CF50274FcA8A2614Abf5dd6bf',
                '2': '2',
                from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                to: '0x045796ABC035001CF50274FcA8A2614Abf5dd6bf',
                tokenId: '2',
            },
            event: 'Transfer',
            signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
            raw: {
                data: '0x',
                topics: [ '0xddf25...', '0x00...afd', '0x00...6bf', '0x00...002' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.transferFrom('0x{address in hex}', '0x{address in hex}', 2).then(console.log)

kip17.safeTransferFrom

kip17.safeTransferFrom(from, to, tokenId [, data] [, sendParam])

Safely transfers the token of the given token id tokenId from the token owner's balance to another address. The address that was authorized to send the token owner's token (the operator) or the token owner him/herself is expected to execute this token transfer transaction. Thus, an authorized address or the token owner should be the sender of this transaction whose address must be given at sendParam.from or kip17Instance.options.from. Unless both sendParam.from and kip17Instance.options.from are provided, an error would occur.

If the to is a contract address, it must implement IKIP17Receiver.onKIP17Received. otherwise, the transfer is reverted.

Note that sending this transaction will charge the transaction fee to the transaction sender.

Parameters

Name

Type

Description

from

string

The address of the owner or the approved operator of the given token.

to

string

The address of the account to receive the token.

tokenId

BigNumber | string | number

The id of the token you want to transfer.

data

Buffer | string | number

(optional) The optional data to send along with the call.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given (without data)
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 9, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x14c5bebc2be86081d8375ba11edba0e541be1df24c1beced1a9e82e3083a8035',
    blockNumber: 6260,
    contractAddress: null,
    from: '0x80b88b47361cec0baee1947868fc872b784cf91e',
    ...
    status: true,
    to: '0xa9066e2b62483bcdf6358874cb87f9e0046e8ad3',
    ...
    events: {
        Transfer: {
            address: '0xA9066e2B62483bcdf6358874CB87f9e0046E8ad3',
            blockNumber: 6260,
            transactionHash: '0x0a92436289e70018f9ebef0df5d3ce87874afd8e5058fcc08fefc6de3e0e9b36',
            transactionIndex: 0,
            blockHash: '0x14c5bebc2be86081d8375ba11edba0e541be1df24c1beced1a9e82e3083a8035',
            logIndex: 0,
            id: 'log_c9c17595',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                '1': '0x0F47Ea1A10B8F7D61c894E392EfaC990A314d313',
                '2': '9',
                from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                to: '0x0F47Ea1A10B8F7D61c894E392EfaC990A314d313',
                tokenId: '9',
            },
            event: 'Transfer',
            signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
            raw: {
                data: '0x',
                topics: [ '0xddf25...', '0x00...afd', '0x00...313', '0x00...009' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 9, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Send via a sendParam object with the from field given (with data)
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 11, '0x1234', { from: '0x{address in hex}' }).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.safeTransferFrom('0x{address in hex}', '0x{address in hex}', 11).then(console.log)

kip17.addMinter

kip17.addMinter(account [, sendParam])

Adds an account as a minter, who are permitted to mint tokens.

Note that the addMinter method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

account

string

The address of the account to be added as a minter.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a minter.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.addMinter('0x{address in hex}', { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0xecd0fb45a32323d5cb14558d1d9299393022d5e7284519598dbd8b14c4c55930',
    blockNumber: 8307,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x1595b5c1027ed36dcb32e4d39766b896d5b97ecb',
    ...
    events: {
        MinterAdded: {
            address: '0x1595b5c1027ed36dCB32e4D39766b896d5B97ecb',
            blockNumber: 8307,
            transactionHash: '0xf8da21958c84aa3ed8bfa5eea0649c5b9a895efa8c7a715196e000bef4f0b8bd',
            transactionIndex: 0,
            blockHash: '0xecd0fb45a32323d5cb14558d1d9299393022d5e7284519598dbd8b14c4c55930',
            logIndex: 0,
            id: 'log_f40a92bf',
            returnValues: {
                '0': '0x90170C1E7E8C14BBf1124f52980372088BA540Dc',
                account: '0x90170C1E7E8C14BBf1124f52980372088BA540Dc',
            },
            event: 'MinterAdded',
            signature: '0x6ae172837ea30b801fbfcdd4108aa1d5bf8ff775444fd70256b44e6bf3dfc3f6',
            raw: {
                data: '0x',
                topics: [ '0x6ae17...', '0x00...0dc' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.addMinter('0x{address in hex}', {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.addMinter('0x{address in hex}').then(console.log)

kip17.renounceMinter

kip17.renounceMinter([sendParam])

Renounces the right to mint tokens. Only a minter address can renounce the minting right.

Note that the renounceMinter method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

If sendParam.from or kip17.options.from were given, it should be a minter with MinterRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.renounceMinter({ from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0xe130d7ee71a2c55b3cf4e2bce9ea26e7c2cde556c7f8288abac60121b27c26c8',
    blockNumber: 8542,
    contractAddress: null,
    from: '0xb72f5cf2627e6614984d8a9f27ee426b29191831',
    ...
    status: true,
    to: '0xf9d0663fc29c48495f42c0b061cb06df6df76c34',
    ...
    events: {
        MinterRemoved: {
            address: '0xF9D0663fC29c48495F42c0b061cB06Df6DF76c34',
            blockNumber: 8542,
            transactionHash: '0x557a4e7b9fd6577ffdb14c2e1f00c0009a7bbda2294502fa765250632b5b0f99',
            transactionIndex: 0,
            blockHash: '0xe130d7ee71a2c55b3cf4e2bce9ea26e7c2cde556c7f8288abac60121b27c26c8',
            logIndex: 0,
            id: 'log_04b47645',
            returnValues: {
                '0': '0xB72F5cF2627e6614984D8A9F27eE426b29191831',
                account: '0xB72F5cF2627e6614984D8A9F27eE426b29191831',
            },
            event: 'MinterRemoved',
            signature: '0xe94479a9f7e1952cc78f2d6baab678adc1b772d936c6583def489e524cb66692',
            raw: {
                data: '0x',
                topics: [ '0xe9447...', '0x00...831' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.renounceMinter({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.renounceMinter().then(console.log)

kip17.mintWithTokenURI

kip17.mintWithTokenURI(to, tokenId, tokenURI [, sendParam])

Creates a token with the given uri and assigns them to the given account. This method increases the total supply of this token.

Note that the mintWithTokenURI method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

to

string

The address of the account to which the minted token will be issued.

tokenId

BigNumber | string | number

The id of the token to be minted.

tokenURI

string

The uri string of token to be minted.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

NOTE If sendParam.from or kip17.options.from were given, it should be a minter with MinterRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0xd2473b9853ad33c5fa0a75187e65733614ed4f8c937d06e239768a5ca32d7c7f',
    blockNumber: 9313,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x7fbf73709054007f5262692f8faf27dee75ab3a6',
    ...
    events: {
        Transfer: {
            address: '0x7FBf73709054007f5262692f8FaF27dEE75Ab3A6',
            blockNumber: 9313,
            transactionHash: '0x17c2eda25c8a817915e3dd77b4fb4838259e8b49ae1c0d8e369167f715a08e7f',
            transactionIndex: 0,
            blockHash: '0xd2473b9853ad33c5fa0a75187e65733614ed4f8c937d06e239768a5ca32d7c7f',
            logIndex: 0,
            id: 'log_d060e77e',
            returnValues: {
                '0': '0x0000000000000000000000000000000000000000',
                '1': '0x203ad91221290901CFDAC9399aCf664499924744',
                '2': '18',
                from: '0x0000000000000000000000000000000000000000',
                to: '0x203ad91221290901CFDAC9399aCf664499924744',
                tokenId: '18',
            },
            event: 'Transfer',
            signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
            raw: {
                data: '0x',
                topics: [ '0xddf25...', '0x00...000', '0x00...744', '0x00...012' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.mintWithTokenURI('0x{address in hex}', 18, tokenURI).then(console.log)

kip17.burn

kip17.burn(tokenId [, sendParam])

Destroys the token of the given token id. Without sendParam.from nor kip17.options.from being provided, an error would occur.

Note that the burn method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

tokenId

BigNumber | string | number

The id of the token to be destroyed.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE The tokenId parameter accepts number type but if the fed value were out of the range capped by number.MAX_SAFE_INTEGER, it might cause an unexpected result or error. In this case, it is recommended to use the BigNumber type, especially for a uint256 sized numeric input value.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.burn(14, { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x09d8ed5582fdd1c39b0f19f14f065659fe275a60856d86a1840535f6df1a2d51',
    blockNumber: 18237,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x2032e61c79a951aacef8033adca96fc3b9b747b4',
    ...
    events: {
        Transfer: {
            address: '0x2032e61C79A951AACEf8033AdCa96fC3b9b747b4',
            blockNumber: 18237,
            transactionHash: '0x4e377d8d65c8565c7bc91568bcdcc0fddeb46a02a778725e437f368a8d9c6165',
            transactionIndex: 0,
            blockHash: '0x09d8ed5582fdd1c39b0f19f14f065659fe275a60856d86a1840535f6df1a2d51',
            logIndex: 0,
            id: 'log_5af49695',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                '1': '0x0000000000000000000000000000000000000000',
                '2': '14',
                from: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                to: '0x0000000000000000000000000000000000000000',
                tokenId: '14',
            },
            event: 'Transfer',
            signature: '0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef',
            raw: {
                data: '0x',
                topics: [ '0xddf25...', '0x00...afd', '0x00...000', '0x00...00e' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.burn(14, {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.burn(14).then(console.log)

kip17.pause

kip17.pause([sendParam])

Suspends functions related to sending tokens.

Note that the pause method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.pause({ from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0xd73c026474b2077a04808ed0ce6713821eaa8afaed476b19d22b28e483747e04',
    blockNumber: 19826,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x601c11f396e92436df8d9bbaff3fbfec906b7f67',
    ...
    events: {
        Paused: {
            address: '0x601C11F396E92436Df8d9bBAFf3fbfEc906B7f67',
            blockNumber: 19826,
            transactionHash: '0x549f7786ca5d2c1877be20126fc51c2418194ecaa8cea536d08f72c2f01919d0',
            transactionIndex: 0,
            blockHash: '0xd73c026474b2077a04808ed0ce6713821eaa8afaed476b19d22b28e483747e04',
            logIndex: 0,
            id: 'log_93d26310',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                account: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
            },
            event: 'Paused',
            signature: '0x62e78cea01bee320cd4e420270b5ea74000d11b0c9f74754ebdbfc544b05a258',
            raw: {
                data: '0x0000000000000000000000001147c04b90d1546d76983e19937ad2cdae8b8afd',
                topics: ['0x62e78...'],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.pause({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.pause().then(console.log)

kip17.unpause

kip17.unpause([sendParam])

Resumes the paused contract.

Note that the unpause method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.unpause({ from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x6a9fc0c70853e696e687b119ba95971a42d91616a040ec17afe1fd4803f5a6cb',
    blockNumber: 19845,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x601c11f396e92436df8d9bbaff3fbfec906b7f67',
    ...
    events: {
        Unpaused: {
            address: '0x601C11F396E92436Df8d9bBAFf3fbfEc906B7f67',
            blockNumber: 19845,
            transactionHash: '0x4f0d2767fc36e5062a34753bc447a2c15b476c304f8e9e013ddf06124db33229',
            transactionIndex: 0,
            blockHash: '0x6a9fc0c70853e696e687b119ba95971a42d91616a040ec17afe1fd4803f5a6cb',
            logIndex: 0,
            id: 'log_364c25d2',
            returnValues: {
                '0': '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
                account: '0x1147c04b90D1546d76983e19937aD2cDAE8b8afD',
            },
            event: 'Unpaused',
            signature: '0x5db9ee0a495bf2e6ff9c91a7834c1ba4fdd244a5e8aa4e537bd38aeae4b073aa',
            raw: {
                data: '0x0000000000000000000000001147c04b90d1546d76983e19937ad2cdae8b8afd',
                topics: ['0x5db9e...'],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.unpause({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.unpause().then(console.log)

kip17.addPauser

kip17.addPauser(account [, sendParam])

Adds an account as a pauser that has the right to suspend the contract.

Note that the addPauser method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

account

string

The address of the account to be a new pauser.

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.addPauser('0x{address in hex}', { from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0xd9f18912c9666a67a2e7445af0abe5140212955b3d35c491e5475d512fdee7d5',
    blockNumber: 20502,
    contractAddress: null,
    from: '0x1147c04b90d1546d76983e19937ad2cdae8b8afd',
    ...
    status: true,
    to: '0x4010afbfbf8d94830b226fc5ff311859af806b90',
    ...
    events: {
        PauserAdded: {
            address: '0x4010afbfbF8d94830b226Fc5ff311859AF806B90',
            blockNumber: 20502,
            transactionHash: '0x5f6fef2df70dcbe67e6d74e201005b618da5d53ac2f85ad31fce39226fd1b70b',
            transactionIndex: 0,
            blockHash: '0xd9f18912c9666a67a2e7445af0abe5140212955b3d35c491e5475d512fdee7d5',
            logIndex: 0,
            id: 'log_bf9f8982',
            returnValues: {
                '0': '0xD050b56bB04Da257D144e6b382318A2B8c58b0B2',
                account: '0xD050b56bB04Da257D144e6b382318A2B8c58b0B2',
            },
            event: 'PauserAdded',
            signature: '0x6719d08c1888103bea251a4ed56406bd0c3e69723c8a1686e017e7bbe159b6f8',
            raw: {
                data: '0x',
                topics: [ '0x6719d...', '0x00...0b2' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.addPauser('0x{address in hex}', {
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.addPauser('0x{address in hex}').then(console.log)

kip17.renouncePauser

kip17.renouncePauser([sendParam])

Renounces the right to pause the contract. Only a pauser address can renounce its own pausing right.

Note that the renouncePauser method will submit a transaction to the Klaytn network, which will charge the transaction fee to the sender.

Parameters

Name

Type

Description

sendParam

object

(optional) An object with defined parameters for sending a transaction. For more information about sendParam, refer to the parameter description of approve.

NOTE If sendParam.from or kip17.options.from were given, it should be a pauser with PauserRole.

Return Value

Promise returns object - The receipt containing the result of the transaction execution. If you want to know about the properties inside the receipt object, see the description of getTransactionReceipt. Receipts from KIP-17 instances have an 'events' attribute parsed via ABI instead of a 'logs' attribute.

Example

// Send via a sendParam object with the from field given 
> kip17.renouncePauser({ from: '0x{address in hex}' }).then(console.log)
{
    blockHash: '0x32bb338ca23846478934416d1b1f4152b69a49411d61b316cff8b3a7d62ca91e',
    blockNumber: 20512,
    contractAddress: null,
    from: '0xe04cb220e94e6595427568c954b5d819392813bc',
    ...
    status: true,
    to: '0x4010afbfbf8d94830b226fc5ff311859af806b90',
    ...
    events: {
        PauserRemoved: {
            address: '0x4010afbfbF8d94830b226Fc5ff311859AF806B90',
            blockNumber: 20512,
            transactionHash: '0x72982fa8a8de25c961cd19bd91aa7acf0111feb8e9026e607d89843bcd8f783a',
            transactionIndex: 0,
            blockHash: '0x32bb338ca23846478934416d1b1f4152b69a49411d61b316cff8b3a7d62ca91e',
            logIndex: 0,
            id: 'log_0a9d1350',
            returnValues: {
                '0': '0xE04cB220e94E6595427568c954b5D819392813bC',
                account: '0xE04cB220e94E6595427568c954b5D819392813bC',
            },
            event: 'PauserRemoved',
            signature: '0xcd265ebaf09df2871cc7bd4133404a235ba12eff2041bb89d9c714a2621c7c7e',
            raw: {
                data: '0x',
                topics: [ '0xcd265...', '0x00...3bc' ],
            },
        },
    },
}

// Using FD transaction to execute the smart contract
> kip17.renouncePauser({
    from: '0x{address in hex}'
    feeDelegation: true,
    feePayer: '0x{address in hex}'
}).then(console.log)

// Using kip17.options.from
// If the value of kip17.options.from is set, this value is used as the default value 
// unless you specify `from` in the sendParam object when sending a transaction with a kip17 instance.
> kip17.options.from = '0x{address in hex}'
> kip17.renouncePauser().then(console.log)

Last updated